Whisky6 2011-08-03 09:18:25
I have a 90 Chevy Suburban with a 350 TBI. I have changed the coil, the
distributor, and the computer. I had the ignition module checked at
Auto Zone, they said it was good. I checked the pick up coil with an
ohmmeter and it is good. I have power reaching the coil, but when
holding a screwdriver in the coil wire next to a ground, I get nothing.
What else could it be?
Augustus 2011-08-03 09:18:42
Try removing the coil and giving it 12V into it’s leads through a battery
charger, then check for high voltage output (carefully). Check for 12V at
the distributor leads. If it checks out, even though they say the ignition
module is good, it would be my first suspect.
Kneedeep_4 2011-08-03 09:18:57
make sure all your wires are plugged in to the distributor…if your gettin
power to the coil then check you cap for carbon build up..i would try
another module also..